abrading

英 [əˈbreɪdɪŋ]

美 [əˈbreɪdɪŋ]

v.  磨损(岩石等); 擦伤(皮肤等)
abrade的现在分词

化学

柯林斯词典

• VERB 磨损；磨蚀；擦伤
  Toabradesomething means to scrape or wear down its surface by rubbing it.
  1. My skin was abraded and very tender.
     我擦破皮了，一碰就疼。

双语例句

• The results showed that after being processed on numerical control lathe, grade polished by SiC micro-powder and diamond abrading agent and size corrected by special tools, the Al_2O_3 ceramic hip joint femur ball has good surface degree of finish and it matches well with the femur handle.
  结果表明，通过数控车床车削、SiC超细粉和金刚石研磨膏分级抛光并用特制工具修正其尺寸，可以得到具有一定表面光洁度并与股骨柄配合良好的Al2O3陶瓷髋关节股骨头假体。
• In order to customise the test to your requirements, choose from a wide variety of abrading wheels and abraser accessories to simulate real-life wear conditions.
  为了自定义的测试您的要求，选择从磨石配件种类繁多的研磨轮，以模拟真实的磨损情况。
• By adjusting the lateral bolts, the clearance that is caused by abrading between the die sleeve and the guiding sleeve will be eliminated.
  当压边模套与导套之间因磨损产生间隙时，借助调节设在侧面的调节螺栓，便可消除产生的间隙；
• The composition, consisting of hard and soft polishing agent, densifier, abrading agent and solvent, of a polishing wax for cars was analyzed by infraed spectra.
  采用红外光谱法分析一种汽车上光蜡组成分，包括硬蜡和软蜡上光剂、增稠剂、研磨剂和溶剂。
• Cluth's abrading is already an old topic, but in the praxis how cut to abrade, but is what everyone at pay attention to, today we to talk about once.
  离合器的磨损已经是老话题了，但是在使用中如何减少磨损，却是大家都在关注的，今天我们来讨论一下。
• The sea water dynamic action is similarly noticeable, it forms to the Binhai karst landform is abrading the function which once again, the corrosion and anew transforms.
  海水的动力作用同样不可忽视，它对滨海岩溶地貌形成起着再度磨蚀、溶蚀及从新改造的作用。
• The diameter of the abrading section is required to be measured for abrasion analysis of the drill pipe. The traditional contact measurement is unefficient and has big human error.
  在石油钻井中，对钻杆的磨损分析需要测量磨损部位的直径尺寸，传统的接触式测量方法效率低，人为误差大。
• Accompanying with sand-like, streaked or globular calcification; reduce to small pieces or particles by pounding or abrading.
  常伴有沙粒状、小条片状、团块状的钙化；通过重击或磨损使变成小的碎片或颗粒。
• The influence of the pretreatment methods by abrading substrate surface, plasma erosion, removing cobalt by corrosion, intermediate layer and forming stable compounds on substrate surface on CVD diamond films was stated.
  分析了表面研磨法、等离子刻蚀法、浸蚀除钴法、沉积中间层法在衬底表面形成稳定化合物等预处理对CVD金刚石薄膜沉积的影响。
• Compared with traditional abrasive techniques, ultrasonic abrasive is high efficiency, and has small cutting force when abrading, and could achieve high surface quality after abrading.
  与传统的研磨技术相比，超声波研磨效率高，研磨时磨粒的切削力小，研磨后表面质量高。